Offered in three widths to suit a range of specialist applications, the T4000V tractor series match high power to weight ratios to best in class manoeuvrability. Key features include power outputs of 65, 78, 87 and 97hp(CV), a wide transmission offering, cab or ROPS and a choice of front axles.

Powerful and Compact

Powered by all-new four-cylinder engines, the T4000V tractor series offers unrivalled performance in a compact package.

Specialist Versatility

Few specialist tractors can match the all-round versatility of a T4000V tractor. Available with automatic 4WD, these tractors can be used in a wide range of applications.

Productive Comfort

Available with an advanced, fully sealed Blue Cab, T4000V tractors match unrivalled comfort in the most unforgiving environments with brilliant all-round visibility.

Engineered to Reduce Costs

Long engine service intervals and low fuel consumption reduce the whole life operating costs of all T4000V models.

The Right Front Axle For Your Needs

All T4000V tractors can be specified with a choice of 2WD or 4WD front axles.

The turn radius of the 2WD drive T4000V tractors can be as low as 2.8m. The 2WD specification is  available on both ROPS and cab models.

A Wide Choice of Efficient Transmissions

Thanks to the modular build of T4000V tractors, the transmissions can be easily matched to end user needs.

Advanced features include power shuttle, power clutch and creep speed options.

PowerShuttle Speed Direction Change

If a fast shuttle between forward and reverse is a priority, consider the 32x16 Powershuttle transmission.

The operator can simply use the electro-hydraulic shuttle lever to change direction. From neutral, the shuttle lever can be used to smoothly feed power to the transmission without using the clutch.

Dual Command™ Offers So Much More

The 32x16 Dual Command™ transmission with power shuttle offers the same number of ratios as Split Command, but allows a high low push button ratio ‘split’ to be made under full load and without using the clutch. A 44x16 Dual Command™ transmission is available to meet specialist requirements.

Creep Speed Option

Creep speeds as low as 160 meters/hour are available, enabling the tractor to carry out a wide range of precision operations. These transmissions are so flexible that this same low speed can be matched to a ratio offering a 40kph transport speed.

Designed Around The Operator

Operator comfort is a key New Holland priority. All controls are ergonomically designed and grouped according to function.

Noise and vibration levels are tightly controlled, with light steering and class leading visibility over the stylish engine hood all contributing to reduced operator fatigue.

Blue Cab for Harsh Environments

The sealed Blue Cab option has thermostatically controlled air conditioning developed to suit harsh environments. Anti-pollen plus recirculation filters remove dust and pollutants. The ventilation system draws in 20% more air than the standard cab. A range of carbon filters can be specified.

Low Cab Roof and Folding Rops

Both standard and Blue Cab models have a newly developed low profile to reduce the overall height of the tractor. ROPS models have a forward folding frame to clear over-hanging crops or access low buildings.

High Comfort Seat

Fitted with a deep cushion seat pan and wide backrest, the seat in T4000 V tractors adjusts to suit all sizes of operator. A choice of mechanical or deluxe air suspension seats are available.

Compact Four-Cylinder Power

With torque as high as 398Nm and torque reserves of up to 46%, T4000V tractors bring massive performance to a compact tractor package.

Developed by Fiat Powertrain Technologies, the Tier III power units are smooth running, fuel efficient and quiet. Proven in existing T5000 and T6000 tractors, these engines have long service intervals to minimise operating costs.

More Power and Torque, Same Fuel Consumption

All T4000 V models develop more power and greater torque at a lower engine speed when compared to the previous TN-A speciality series. This increase in output is achieved without an increase in fuel consumption, this remaining at an optimum 219g/kWh for the range topping T4050 V.

Intercooled Efficiency

By cooling the engine intake air, the intercooler fitted to the T4000 V power units boosts combustion efficiency. This is of particular benefit in high ambient temperatures, overall fuel use and power development remaining consistent, regardless of conditions.

Engineered for 100% BioDiesel

All T4000 V are designed to operate on biodiesel fuels without costly modifications. Talk to your New Holland dealer for full details.

Easier to Look After

From the outset, New Holland has designed all T4000 models for ease of maintenance. A fast access fuel flap allows speedy refuelling without raising the one-piece engine hood. Engine service intervals are as high as 600 hours on the T4050 V.

PTO and Hydraulics

The modular build of T4000 V tractors enables New Holland to offer a broad range of specifications that exactly matches your specialised need.

The standard hydraulic flow of all models is 48.6Lpm. Need more flow? The MegaFlow pump if fitted as standard on all Dual Command transmission models and output is increased to 63.8Lpm.

T4000V. Factory built to your specification.

Remotes to Power Specialist Attachments

Modern attachments can require three or more remote valves. With T4000, this is not a problem. Up to three remotes, plus two push button controlled flow dividers, allow up to five outlets to be specified.

Up to two mid-mount remotes can also be fitted for use with front mounted implements. Oil flow rate can be adjusted as required by using a simple control valve.

Mechanical Hydraulics with Lift-O-Matic™

The mechanical hydraulic system features proven Flexion Bar™ lower link draft sensing. This offers excellent weight transfer performance and easily adjusted sensitivity.

Lift-O-Matic™ is standard and enables an implement to be raised and lowered to its previous setting using a single control.

Also, a mechanical lift height control limiter ensures accurate implement lift height setting which eliminates the risk of damaging PTO shafts.

Versatile Linkage with High Capacity

For maximum versatility, the rear linkage is adjustable to match Cat I or Cat II implements. All T4000 V models offer high lift capacities of up to 2600kg. Quick-attach couplings are standard with remote linkage controls to speed the fitting and removal of attachments.

Hydraulic Linkage Settings

Hydraulic stabilisers can be specified to allow the attachment to be offset to either side of the tractor. The stabilisers can be set in a fixed or float position by the push of a button. A levelling ram can also be specified for the right lower link arm. Both systems have a dedicated hydraulic supply.

Direct Output, No Loss of Power

Engaged via a servo assisted control, the rear pto on T4000 V tractors has a direct driveline to minimise power loss. Maximum engine power is directed tothe PTO for optimum efficiency and performance.
A choice of Ground Speed/540/540E/1000 PTO speeds are available.

Advanced Traction Management

The acclaimed and proven New Holland automatic 4WD system is now available on all T4000 V models. For stability and safety, 4WD is also engaged when both brake pedal are pressed. The front and rear differentials are engaged and released by a dash mounted switch.

Power Clutch

Dual Command™ transmissions are fitted with a Power Clutch option. This allows the operator to use a push button on the main shift lever to operate the clutch. This makes changes on the move fast, smooth and comfortable.

------------------------------------------------------------------- 

Download T4000F, T4000N and T4000V Brochure specifications: Click Here
Download T4000 Dealer Installed Accessories: Click Here